Description: Door drive system, left to door. M6X16
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Control unit mount. Gas cartridge to roof frame, left. Holder mount. Holder to body. Upper left holder to fender. Ground line to voltage converter. Holder to battery charger.

Description: Stationary heater/auxiliary heater.

Description: To heat exchanger and connecting point.

Description: Clamp, fuel line 2, fuel metering pump, stationary heater - stationary heater/booster heater.

Description: Cover to left main floor. Mount, wheel arch liner, left. Wheel arch liner to bodyshell, front axle, front left. Cover to left rear-end floor. Rear holder mount.

Description: Line to switchover valve.

Description: Piping. Coolant line through wheel well. Rear window. Wiper motor to rear panel door. Headlamp wiper/washer.

Description: Bracket to c-pillar. Additional pump m6x10. Bracket to support m 6x10. Front axle brake hose. Hook to side panel m 6x10. At steering gear m6 x 10. Horn to bracket m6x10. On upper frame cross member. Charge plunger unit.

Description: Connecting point to connecting point.

Description: Coolant hose to engine at top. 14/12 mm. Bleed line mount. 14/12 MM. At charging air intercooler. 14/12 mm. Hose mount. 14/12 MM.

Description: Bracket, fuel metering pump, stationary heater.

Description: Compensating reservoir to body.

Description: FUEL TANK TO HOSE. 9 MM - 9.5 MMInside diameter: 9,5mmOutside diameter: 11mmMaterial thickness: 0,6mm. BREATHER LINE TO ACTIVATED CHARCOAL FILTER. 9 MM - 9.5 MMInside diameter: 9,5mmOutside diameter: 11mmMaterial thickness: 0,6mm. FUEL PUMP TO TANK. 9 MM - ...